How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AMEDEE Your Own Question
AMEDEE
AMEDEE, FORD TECHNICIAN
Category: Ford
Satisfied Customers: 26414
Experience:  ASE CERTIFIED TECHNICIAN ADVANCED LEVEL SPECIALIST. Wisconsin certified emissions state inspector
279429
Type Your Ford Question Here...
AMEDEE is online now
A new question is answered every 9 seconds

No Comment Added

Customer Question

No Comment Added
Submitted: 10 years ago.
Category: Ford
Expert:  AMEDEE replied 10 years ago.

REMOVAL


Disconnect battery ground cable and positive battery cable.
Raise and suitably support vehicle on hoist.
Remove LH front tire and wheel assembly.
Disconnect Turbine Shaft Speed (TSS) sensor electrical connector.
Remove one bolt and TSS from transaxle.

INSTALLATION


To install, reverse Removal procedure. Tighten TSS retaining bolt to 9-12 Nm (80-106 inch lbs.).

 

 

graphic