How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Fordblue Your Own Question
Fordblue
Fordblue, Senior Master Tech
Category: Ford
Satisfied Customers: 59
Experience:  Certified Ford senior master tech, Diesel certified, ASE master tech,L1certified, 29 years exp.
2044272
Type Your Ford Question Here...
Fordblue is online now
A new question is answered every 9 seconds

How do you replace a rear hub assembly for a ford explorer ...

This answer was rated:

How do you replace a rear hub assembly for a ford explorer 2002 ? I have all ready removed the rotar, now what? is there any other hidden bolts ankors or anything else that has to be disconnected or do I need a wheel puller of some sort? Thanks Keith.
Hi,
I'm assuming you have a bad bearing.
To replace bearing you need to remove the rear knuckle and use a press to remove the hub. Then you can remove the snap ring so the bearing can be pressed out.
Fordblue
Fordblue and 2 other Ford Specialists are ready to help you