How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask HDGENE Your Own Question
HDGENE, Ford Senior Master/Diesel/Trans
Category: Ford
Satisfied Customers: 5706
Experience:  25 years Auto experience, Ford ,GM, Chrysler, Asian & European
Type Your Ford Question Here...
HDGENE is online now
A new question is answered every 9 seconds

f250: replace the automatic transmission front pump seal

Customer Question

how to replace the automatic transmission front pump seal, once the transmission is removed from an f250.
Submitted: 11 years ago.
Category: Ford
Expert:  HDGENE replied 11 years ago.
using a seal puller remove the front seal being careful not to nick the bushing inside the front of the pump. Take the new seal and pack the inside area of the seal where the garter spring is with grease and drive the seal in using either a seal installer or oversized socket.