How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask SuperDave Your Own Question
SuperDave, ASE Certified Technician
Category: Lincoln
Satisfied Customers: 1491
Experience:  over 16 years experience
Type Your Lincoln Question Here...
SuperDave is online now
A new question is answered every 9 seconds

Where the that attach the heater core on the passenger side?

Customer Question

where the nuts that attach the heater core on the passenger side?
JA: HHave you checked the coolant level? Has there been any leaking from the hoses?
Customer: no
JA: What is the model/year of your Lincoln?
Customer: 2000 Lincoln Town Car executive series
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: yes
JA: Anything else you think the mechanic should know?
Customer: I need the instruction on how to take the core out.
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Lincoln Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Lincoln
Expert:  SuperDave replied 1 year ago.

They are on the plastic case behind the dash.The top one on the left is hard to see.Here is instructions.

Expert:  SuperDave replied 1 year ago.

This is a very big job.The steering column has to be dropped down and the whole dash pulled rearward.

Customer: replied 1 year ago.
Do you have a video on replacing a heater core on a 2000 Lincoln Town car?
Expert:  SuperDave replied 1 year ago.

It is the same as a ford crown vic.Click HERE.

Customer: replied 1 year ago.
Replaced my heater core now my heat do work what might be the problem?
Expert:  SuperDave replied 1 year ago.

Could be a bad blend door motor.