How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask SuperDave Your Own Question
SuperDave, ASE Certified Technician
Category: Lincoln
Satisfied Customers: 1491
Experience:  over 16 years experience
Type Your Lincoln Question Here...
SuperDave is online now
A new question is answered every 9 seconds

FUEL TANK VAPOR VALVE that does not have no release to

Customer Question

FUEL TANK VAPOR VALVE that does not have no release to release the line. it look like hard molded plastic stuck part 9b593 goes into hard plastic with no release1998 Lincoln Town Car
Submitted: 1 year ago.
Category: Lincoln
Expert:  SuperDave replied 1 year ago.

The pdf is blank, but I do know what you are talking about.The hose is molded plastic you will have to cut it off.Then take some needle nose pliers and stick them inside the remaining hose and stretch the hose to slide the new part on.