How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask john aka eauto Your Own Question
john aka eauto
john aka eauto, The Car Guy
Category: Lincoln
Satisfied Customers: 16309
Experience:  ase certified imac cerified
6149662
Type Your Lincoln Question Here...
john aka eauto is online now
A new question is answered every 9 seconds

crankshaft position sensor located on a 2004 lincoln navigator

Customer Question

where is the crankshaft position sensor located on a 2004 lincoln navigator
Submitted: 6 years ago.
Category: Lincoln
Expert:  john aka eauto replied 6 years ago.
Hi . Thank you for asking your question on JustAnswer.graphic


Thank you again for trusting us with your problem. John aka eauto
Customer: replied 6 years ago.
No I cannot accept this picture it dosen't show me what my Question was
Expert:  john aka eauto replied 6 years ago.
graphic
Customer: replied 6 years ago.
Ok now how do I move the AC compressor in order to get the old CPsensor out , I'm very frustrated because I went here to get answers & all I'm getting is pictures I can get myself !!!!! I NEED to know how to get the old out
Expert:  john aka eauto replied 6 years ago.

u asked where it was, if you wanted instruction you just had to ask...sorry hear ya go

 

  1. Disconnect the A/C compressor field coil electrical connectorgraphic

    1. Disconnect the crankshaft position (CKP) sensor electrical connector and detach the wiring harness.graphic

      1. NOTE: It is not necessary to remove the A/C compressor bolts.

      Loosen the bolts enough to slide the compressor down one inch , allowing access for CKP sensor removalgraphic