Exercise Equipment
Exercise equipment repair questions? Ask a technician
Connect one-on-one with {0} who will answer your question
Answered in 12 hours by:
2/11/2023
VerifiedHello
The E7 error code on a Sole F85 Treadmill typically indicates a problem with the speed sensor or the speed sensor cable. This error can occur if the speed sensor is not functioning properly or if there is a problem with the speed sensor cable connection.
Here are some steps you can try to resolve the E7 error code on your Sole F85 Treadmill:
Check the speed sensor: Make sure the speed sensor is clean and properly positioned. If the speed sensor is dirty, clean it with a soft cloth.
Check the speed sensor cable: Make sure the speed sensor cable is properly connected to the control board and the speed sensor. If the cable is loose, tighten the connection. If the cable is damaged, you may need to replace it.
Reset the treadmill: Unplug the treadmill from the electrical outlet, wait for 30 seconds, and then plug it back in.
Test the treadmill: After resetting the treadmill, try to run the treadmill at a slow speed to see if the E7 error code still appears.
If the E7 error code persists after trying these steps, you may need to have the treadmill serviced by a professional. The issue may be with the control board or another component that requires a trained technician to diagnose and repair.
How JustAnswer works
Describe your issueThe assistant will guide you
Chat 1:1 with an exercise equipment technicianLicensed Experts are available 24/7
100% satisfaction guaranteeGet all the answers you need
Related Exercise Equipment Questions
I have a Sole F80 treadmill that has stopped working. At
I have a Sole F80 treadmill that has stopped working. At first, the incline stopped working, the treadmill would start up and go through the program selection process. When I press “start”, it will ru… read more
Richard
Bachelors of Science
2,289 satisfied customers
Have a Sole F85 wirh e 6 error. Starts up. Then when i push
Hi, have a Sole F85 wirh e 6 error. Starts up. Then when i push start it clicks and nothing happens. Slightly elevated and error came after i pulled the safe key by mistake. How can i reset thia and l… read more
treadmilltech
Technician
High School or GED
9,541 satisfied customers
L5 error. No idea, it's a older model that was given to me
L5 error JA: Is the error code still there after the machine is unplugged and restarted? Customer: no JA: When was the equipment last serviced? Customer: No idea, it's a older model that was given to … read more
Bill W.
Sole Managing Member/Technician
Associates Degree
2 satisfied customers
I have a sole treadmill model F63. My home encountered a
Hi. I have a sole treadmill model F63. My home encountered a lightning strike. The machine powers on and counts down, however the belt does not move. Upon trying to increase speed to make it move, a l… read more
Louie
Technician
90 satisfied customers
My treadmill only clicks on if I turn it on and off twice.
My treadmill only clicks on if I turn it on and off twice. After a while the console turns on but flickers but with no numbers. Eventually I may get a beep at which the numbers on the console appear a… read more
treadmilltech
Technician
High School or GED
9,541 satisfied customers
I have a SOLE Treadmill that recently displayed a E5 error
I have a SOLE Treadmill that recently displayed a E5 error code. … read more
J.T.
Technician
2,179 satisfied customers
My Sole treadmill stops after about 2 minutes and the
My Sole treadmill stops after about 2 minutes and the display showed an error code LS1 low speed … read more
treadmilltech
Technician
High School or GED
9,541 satisfied customers
My Norditrack T6.5s treadmill suddenly started operating
My Norditrack T6.5s treadmill suddenly started operating faster than input speed. Speed 3.0, which used to be a brisk walk, now feels like 5.0 or 6,0 (running). When I went into calibration mode, the … read more
J.T.
Technician
2,179 satisfied customers
Error message on an Alliance Fitness treadmill - E-11. Just
Error message on an Alliance Fitness treadmill - E-11 … read more
treadmilltech
Technician
High School or GED
9,541 satisfied customers
Sole F85 getting low speed error. Treadmill hasn't been used
Sole F85 getting low speed error. Treadmill hasn't been used in a few years and hardly had any use prior to being stowed and covered. I have checked motor for power with 12v battery and speed sensor s… read more
J.T.
Technician
2,179 satisfied customers
Sole F80 with LS1 error code. Re occurs as soon as you start
Don't know, got it used. The belt and motor move freely. … read more
treadmilltech
Technician
High School or GED
9,541 satisfied customers
Do you have any experience with repairing Sole F63
Do you have any experience with repairing Sole F63 treadmills? … read more
J.T.
Technician
2,179 satisfied customers
I am getting an E7 error message on my T8500 HRC treadmill.
I am getting an E7 error message on my T8500 HRC treadmill. After turning off/on (resetting), the treadmill starts and then stops when speed increases. When it stops the message E7 is displayed. … read more
Harry
2,803 satisfied customers
I have a sole f85 and the lsi keeps coming on I have tried
I have a sole f85 and the lsi keeps coming on I have tried to calibrate it but it won't continue we have done the sensor and everything it's not the motor please give me an advice thanks my name is***… read more
J.T.
Technician
2,179 satisfied customers
Sole treadmill stopped with a LS1 error, F63, Just started.
Just started. Replaced belt 3 months ago and issue went away. Using treadmill lube every other week and no issues. … read more
J.T.
Technician
2,179 satisfied customers
Weve had a LifeSpan tr2000-hrc for almost five years and it
We've had a LifeSpan tr2000-hrc for almost five years and it was fine till it froze in an incline position; we contacted the mfr and they sent an incline controller and then 2 new motors. Neither fixe… read more
Matthew
Technician
Associate Degree
147 satisfied customers
Sorry, This machine is a eclipital. Your answer appears to
Sorry, This machine is a eclipital. Your answer appears to me as being for a treadmill. This machine has no belt. Do you know how to recalibrate, we have moved machine and have not used for a year. Al… read more
treadmilltech
Technician
High School or GED
9,541 satisfied customers
We own a PROFORM T10.0 treadmill model # PFTL05050 which hasnt
We own a PROFORM T10.0 treadmill model # XXXXX which hasn't been used for a while. When I start it and get on, the belt alternates between slowing down and /or speeding up and then finally just stops.… read more
treadmilltech
Technician
High School or GED
9,541 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
JustAnswer in the News:
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
What Customers are Saying:
Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.
Freshfield, Liverpool, UK
This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!
Los Angeles, CA
Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.
Hesperia, CA
I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.
Kernersville, NC
Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.
Woodstock, NY
Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.
Elkton, Maryland
He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.
Dallas, TX
< Previous | Next >
Meet the Experts:
treadmilltech
Technician
9,541 satisfied customers
20+ years experience repairing exercise equipment with emphasis on Nordictrack/Proform and Horizon
J.T.
Technician
2,179 satisfied customers
I have over 10 years experience in all fields of fitness equipment repair and service.
Neil
Technician
213 satisfied customers
NZCE Electronics and Computing
Matthew
Technician
147 satisfied customers
20+ years in Electronics, Mechanical, Service, Repair, Customer Service, Quality Control, Document Control, and Maintenance w/ 10+ in fitness equipment. All brands/models
Dan
Master Tech and Repair Facility Trainer
115 satisfied customers
USAF trained; A.A.S Electronics; A.A.S. Education; Currently teaching basic and advanced electronic theory for the DoD.
Louie
Technician
90 satisfied customers
25+ yrs. experience in the field and 5+ yrs. online, down to component level.
Carl L
Master Technician
88 satisfied customers
20+ Years of Professional Computer / Electronic Repair Experience.
< Previous | Next >
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
