How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask J.T. Your Own Question
J.T.
J.T., Technician
Category: Exercise Equipment
Satisfied Customers: 1099
Experience:  I have over 10 years experience in all fields of fitness equipment repair and service.
16229639
Type Your Exercise Equipment Question Here...
J.T. is online now
A new question is answered every 9 seconds

When I start my incline trainer it will run and actually

Customer Question

When I start my incline trainer it will run and actually increase speed for a minute and then come to a complete stop
JA: What's the make/model of your device? How old is it?
Customer: Nordic track incline trainer x3. model number ntl15008.0
JA: How long has this been going on? What troubleshooting have you tried?
Customer: just started today. Tried adjusting the belt tightness
JA: Anything else you want the equipment expert to know before I connect you?
Customer: that is all
Submitted: 7 months ago.
Category: Exercise Equipment
Expert:  J.T. replied 6 months ago.

Hi you need a new motor control board. Easy to replace you can order one from www.fitnessrepairparts.com or www.treadmilldoctor.com

Expert:  J.T. replied 6 months ago.

All you need is a screwdriver to replace it.

Unplug the machine.

Unscrew and remove the plastic motor cover.

Unplug all the wires that plug into the motor control board.

Unscrew the board from the machine and take it out.

Screw the new board in and wires, cover .