How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Electronic Engineer
Category: Exercise Equipment
Satisfied Customers: 17913
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your Exercise Equipment Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a nautilus pro series ev716 elliptical it worked fine

Customer Question

i have a nautilus pro series ev716 elliptical
it worked fine now
i wont turn on.
checked all wire connections
it has 120 volts to power supply.
one red led lights on the board, nothing else .
power supply ?
Submitted: 1 year ago.
Category: Exercise Equipment
Expert:  Pete replied 1 year ago.

Hi Andy,

Customer: replied 1 year ago.
Still waiting for a response
Thanks Andy
Expert:  Pete replied 1 year ago.

Sorry for the delay - my previous reply appears not to have gone though.

You will need to test the voltage outputs from the power supply board, and also test the wiring going to the console - if there is power going to the console but no display is appearing on it at all then the console has failed and will need to be replaced.

Expert:  Pete replied 1 year ago.

Hi, just checking in on your question, do you need any further assistance?