How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask J.T. Your Own Question
J.T.
J.T., Technician
Category: Exercise Equipment
Satisfied Customers: 1097
Experience:  I have over 10 years experience in all fields of fitness equipment repair and service.
16229639
Type Your Exercise Equipment Question Here...
J.T. is online now
A new question is answered every 9 seconds

I have a Pro-form XP treadmill. When i place the button to

Customer Question

I have a Pro-form XP treadmill. When i place the button to start the treadmill and then push the start button the motor starts but then immediately shuts off. It will not start again until I remove and reinsert the key. The motor will again start but then immediately turn off.
Submitted: 1 year ago.
Category: Exercise Equipment
Expert:  J.T. replied 1 year ago.

You need a new Motor control board. Very easy Repair. Just remove the Motor cover. ( sounds like you have that done) then just remove all the wires and unscrew the board. Replace with a new one. You can order one from fitnessrepairparts. Com or Treadmill doctor. Com

Expert:  J.T. replied 1 year ago.

hi do you still need assistance?