How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Electronic Engineer
Category: Exercise Equipment
Satisfied Customers: 17925
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your Exercise Equipment Question Here...
Pete is online now
A new question is answered every 9 seconds

EO keeps coming up where time is when we push start

Customer Question

EO keeps coming up where time is when we push start
Submitted: 1 year ago.
Category: Exercise Equipment
Expert:  Pete replied 1 year ago.


I am Pete, and I'll be happy to assist with your question.

THe E0 error is usyally caused by a faut with the speed sensor. It should be located near the front roller or fitted to the motor. Check it for proper alignment, cleanliness and operation. It should be fitted very close to the magnet or toothed wheell. You can test these manually by turning the belt by hand and look to see if there is a blinking LED light on the motor control board. If there is, then the sensor is working ok. If the light on the motor control board does not blink then the sensor needs replaced.

Customer: replied 1 year ago.
There magnetics are on the wheel where the sensor is, going back to the board but no lights are flashing when we move the treadmill, we cleaned the magnetics but no change. When we move the treadmill there's a dim light on the board down lower and gets brighter the faster we move it, on the control panel the speed indicator does not light up at all
Expert:  Pete replied 1 year ago.

Ok, then that does indicate a more serious problem, perhaps with the console or the power supply.

Have you checked all wiring and cable connections first?

What test equipment do you have available?