How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Electronic Engineer
Category: Exercise Equipment
Satisfied Customers: 18124
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your Exercise Equipment Question Here...
Pete is online now
A new question is answered every 9 seconds

Well I have a proform cross trainer e and am having the same

Customer Question

well I have a proform cross trainer e and am having the same problem as one of the questions, Im getting an E02 displayed when i turn it on.I found the answer to the question helpful and did what it said but one part i dont understand
Submitted: 2 years ago.
Category: Exercise Equipment
Customer: replied 2 years ago.
the previous answer said to make sure both clips on both sides of the thrust washer (white plastic) are in place.I don't see where these are or are supposed to be.
Expert:  Pete replied 2 years ago.
Hi there,
The "thrust washers" are like bearings.