How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Electronic Engineer
Category: Exercise Equipment
Satisfied Customers: 17254
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your Exercise Equipment Question Here...
Pete is online now
A new question is answered every 9 seconds

I own a EVO treadmill EV622T supplied by TFG Australia - I

Customer Question

I own a EVO treadmill EV622T supplied by TFG Australia - I have lifted up the bed of the machine until it clicked into place - instructions state hold bed of machine with both hands, use foot to kick the safety sleeve lightly to disengage. The pull down the bed - I have done as instructed and the bed will not release. I've not had a problem with it in the past. What is the problem ??
Thank you
Submitted: 2 years ago.
Category: Exercise Equipment
Expert:  Pete replied 2 years ago.
Hi there, The mechanism seems to not be releasing.You will need a second person to hit the safety sleeve with a rubber mallet whilst you hold the bed.This should help to release the stuck mechanism.