How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Neil Your Own Question
Neil, Technician
Category: Exercise Equipment
Satisfied Customers: 3760
Experience:  NZCE Electronics and Computing
Type Your Exercise Equipment Question Here...
Neil is online now
A new question is answered every 9 seconds

My NordicTrack a2550 Treadmill is making a clicking sound at

Customer Question

My NordicTrack a2550 Treadmill is making a clicking sound at the pulley. There is a little black pin (Reed Switch) clicking

that rides on the pulley that is clicking. How can I fix this? Thanks

Submitted: 2 years ago.
Category: Exercise Equipment
Expert:  Neil replied 2 years ago.
Hi That reed switch should be very close to that pully but not touching it, you should b able to adjust its position until it a millimeter or two away from the pully. This is the spped sensor that monitors the speed of the walking belt. Make sure one of the magnets hasn't come adrift, it might be that rather than the sensor moving