How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask treadmilltech Your Own Question
treadmilltech, Technician
Category: Exercise Equipment
Satisfied Customers: 5645
Experience:  20+ years experience repairing exercise equipment with emphasis on Nordictrack/Proform and Horizon
Type Your Exercise Equipment Question Here...
treadmilltech is online now
A new question is answered every 9 seconds

I have a Universal Unitrack T-4000 and it wont operate on

Resolved Question:

I have a Universal Unitrack T-4000 and it won't operate on the time display it shows "LOOP"
was wanting to know if any body was familiar with this and could offer some assistance/advice.
Submitted: 6 years ago.
Category: Exercise Equipment
Expert:  treadmilltech replied 6 years ago.
Try this first:
# XXXXX a 12-18 volt dc battery fully charged(like one from a cordless drill)
# XXXXX sure it is fully charged, because it won't work if not
# XXXXX the + and - to the motor red is + and black is -
# XXXXX the motor turns slowly your motor is ok

Check to make sure there are LED's lit on the motor control board and let me know which ones and if any of them blink when you run the motor manually.
Customer: replied 6 years ago.
I checked the motor it operates fine. When I manually turn the motor I get an led labeled "speed" operate ( flashing on and off ). If it helps the model number for this treadmill is 293065.
Expert:  treadmilltech replied 6 years ago.
Unplug for 30 minutes and replug in and if the error is still present replace the console. Your motor and controller seem to be working fine.
Customer: replied 6 years ago.
Hi thanks for your help! Could you please explain what your refering to when you say console. Thanks
Expert:  treadmilltech replied 6 years ago.
The console is where your digital readout is and where you select start and stop.
treadmilltech and other Exercise Equipment Specialists are ready to help you