How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask TOM Your Own Question
TOM, Gunsmith
Category: Firearms
Satisfied Customers: 4314
Experience:  17 YRS EXPERIENCE,Certified Armorer
Type Your Firearms Question Here...
TOM is online now
A new question is answered every 9 seconds

I have a Browning Citori special steel 2.3/4 and 3. Serial

Customer Question

Hi, I have a Browning Citori special steel 2.3/4 and 3. Serial no 18896MT131, it has a stock with standard stock with 1 and 1/2 inch drop. Can I purchase an off the shelf stock with 1 and 3/4 inch drop, if so what approximate price. Regards Ian.
Submitted: 1 year ago.
Category: Firearms
Expert:  TOM replied 1 year ago.
Hi,Call Browning at(###) ###-#### They list over 100 different stocks for the Citori. Tech Support should be able to tell you which stock to get, the sizes are not listed in the parts catalog. Be prepared, the average cost is $550. It may be a lot easier to have a gunsmith rework your existing stock. It is pretty easy to remove 1/4" from the stock. It will need to be re-finished, cost should be about $100. Tom