How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask NCCPrime Your Own Question
Category: Engineering
Satisfied Customers: 68
Experience:  President at NCC Prime Construction Inc.
Type Your Engineering Question Here...
NCCPrime is online now
A new question is answered every 9 seconds

What size header customer build do you need non bearing 30

Customer Question

what size header customer build do you need for a non bearing 30 ft spreed with a point load?
Submitted: 1 year ago.
Category: Engineering
Expert:  NCCPrime replied 1 year ago.


Can you please provide more information? Your question is not so clear. What do you mean a non bearing load with a point load? Thanks

Customer: replied 1 year ago.
Point load is just each side of the header supports as a single column on each side of the span... in this case 4x4. Four 4x4 support beams in the back and two up front. The span is 35' and width is 15'. See attached photo. No load roof is meaning no roofing material. Putting up light weight screen material.

Related Engineering Questions