Consumer Electronics

Electronics Repair Questions? Ask an Electronics Technician

Ask an Expert,
Get an Answer ASAP!

I have a NIkon TS100 Inverted microscope that has a model…

Customer Question
I have a NIkon...

I have a NIkon TS100 Inverted microscope that has a model C-SHG power source. Can I replace the C-SHG with a C-SHG1?

Technician's Assistant: How long have you had your C-SHG1?

I do not have a C-SHG1 my C-SHG may be malfunctioning and I need to replace it but can only find C-SHG1. Are they interchangeable?

Technician's Assistant: What have you tried so far with your Nikon product?

Are you reading my messages or are you a robot?

Submitted: 7 months ago.Category: Consumer Electronics
Show More
Show Less
Ask Your Own Consumer Electronics Question
Answered in 22 minutes by:
1/6/2018
Electronics Technician: Kraig, Engineer replied 7 months ago
Kraig
Kraig, Engineer
Category: Consumer Electronics
Satisfied Customers: 624
Experience: Broadcast Engineer for over 7 years.
Verified

Hi, I'm JA Engineer. Welcome to JustAnswer. I'm reviewing your question now and will post back with your reply ASAP.

Ask Your Own Consumer Electronics Question
Customer reply replied 7 months ago
The C-SHG is a 50 Watt power source for a 50 Watt mercury lamp. We need to replace it but all we can find is a C-SHG1 which is a 100 Watt power source for a 100 Watt lamp. Could we safely use the C-SHG1 (100 watt source) with the 50 Watt lamp? Or could we replace the lamp and the source and use safely with the TS100?
Electronics Technician: Kraig, Engineer replied 7 months ago

Using the 100 Watt power source would blow the 50 Watt lamp.

I am not sure how the wiring of the microscope circuitry is in terms of using the 100 Watt power source and then using a 100 Watt lamp.

Let me opt out and allow another Expert to assist you.

Ask Your Own Consumer Electronics Question
Customer reply replied 7 months ago
Thanks, ***** ***** think we just have to get ours fixed. Please end this thread.
Electronics Technician: Harry, Customer Service replied 7 months ago
Harry
Harry, Customer Service
Category: Consumer Electronics
Satisfied Customers: 2,824
Experience: IT at Justanswer
Verified

Hello:

Welcome to JustAnswer! My name is ***** ***** I am happy to be assisting you today. My sincerest apologies that it look so long for someone to reply, we're a bit behind with the holidays upon us. Before we begin, can you please let me know if you still need help with your question? Just use the reply box to let me know

Ask Your Own Consumer Electronics Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with an electronics technicianLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Steve G. Your Own Question
Steve G.
Steve G.
Steve G., Engineer
Category: Consumer Electronics
Satisfied Customers: 2,358
2,358 Satisfied Customers
Experience: VP of electronic repair company. Audio nut since 1974. Home Theater advisor. Vinyl holdout!

Steve G. is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I'm screaming your praises!! WOW! I plugged my TV in and bammo! The picture came on bright and beautiful. What a relief! YOU saved me some money and headache.

VMUnited States

I love this site! $9 instead of a repairman or new/used frig can't be beaten. This older woman will worry less now that she knows about this site. Bless you all.

WindyUSA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

< Previous | Next >

Meet the Experts:

Steve G.

Steve G.

Engineer

2,358 satisfied customers

VP of electronic repair company. Audio nut since 1974. Home Theater advisor. Vinyl holdout!

John

John

Engineer and electronic enthusiast for more than 12 years.

228 satisfied customers

I am here to help you!

Russell H.

Russell H.

Service Tech

4,832 satisfied customers

8+ years of professional experience

Louie

Louie

Technician

4,619 satisfied customers

25+ yrs. experience in the field and 5+ yrs. online, down to component level.

Greg A.

Greg A.

Engineer

1,394 satisfied customers

Engineer / Consultant

Rod

Rod

Systems Engineer

1,319 satisfied customers

FCC Commercial Licenses, BSCS, ASEET, 40+years Electronics & Communication Systems

Martin

Martin

Engineer

1,248 satisfied customers

16 years, include works in aluminium plant, industrial machinery, military weapons, programming

< Previous | Next >

Related Consumer Electronics Questions
D5300 HAS MESSAGE "METERING MALFUNCTION DETECTED... CONTACT
D5300 HAS MESSAGE "METERING MALFUNCTION DETECTED... CONTACT AUTHORIZED SERVICE ...." Can "Phoenix Camera Repair at*****" fix this in house? Or is it a send away repair? … read more
Russell H.
Russell H.
Service Tech
Vocational, Technical or Trade Scho
4,832 satisfied customers
I have a Nikon 1 system Nikkor 6.7 -23mm lens with a broken
Hello. I have a Nikon 1 system Nikkor 6.7 -23mm lens with a broken bayonet/mount. I am able to take the same off a Nikon 1 system Nikkor10-30mm "donor" lens. Are the mounts/bayonet interchangeable or … read more
Kraig
Kraig
Engineer
624 satisfied customers
I have a Nikon eclipse 50i microscope. The light was not
Hi I have a Nikon eclipse 50i microscope. The light was not working but when I changed the bulb still nothing. Power is coming into the instrument as noted by the little green diode. Ii is as if the f… read more
Michael
Michael
Appliance Repair Technician
Bachelor's Degree
3,516 satisfied customers
I need to find a 24 volt DC motor model ZYT-63-01 and
I need to find a 24 volt DC motor model ZYT-63-01 and ZYT-63-01a in order to rebuild a robotic pool cleaner. I couldn't find them available for sale online. Can you make any suggestions for how I woul… read more
Michael
Michael
Appliance Repair Technician
Bachelor's Degree
3,516 satisfied customers
Epson Robot Operators Window is displaying: Epson RC+6.0
Epson Robot Operators Window is displaying: Epson RC+6.0 Warning Error 9716, Power Supply Failure of the Absolute Encoder. Replace the Battery to a new one. Check the Robot internal wiring. Previoiusl… read more
Russell H.
Russell H.
Service Tech
Vocational, Technical or Trade Scho
4,832 satisfied customers
Xantrex XM 1000 inverter showing error messages "E05" and "OL".
We have a xantrex xm 1000 inverter in our class c motor home. We are getting some messages on the display such as "E05" and "OL", flashing at us. Can you tell me what is wrong??… read more
ragankel0323
ragankel0323
Field Service Engineer III
Master\u0027s Degree
58 satisfied customers
Dear Sirs: I am a professor from the University of Colorado,
Dear Sirs: I am a professor from the University of Colorado, Boulder, who is currently visiting the University of Ghana in Legon, Accra. Here I find a beautiful Leitz Diaplan on which fluorescence is … read more
Craig
Craig
Electrical Director
Electrical Automation Technician
2,133 satisfied customers
I have a Go video DVR 4300 that has hardly been used. I just
I have a Go video DVR 4300 that has hardly been used. I just played a video tape produced by PGA Tour. No problem. Then I inserted a Panasonic SHG tape into the VHS PlayPak unit and put it in to play.… read more
jdsvideo
jdsvideo
Consumer Repair Technician
Associate Degree
1,065 satisfied customers
I have a Samsung LNS2651/DXX . I started to experience problems
I have a Samsung LNS2651/DXX . I started to experience problems with the TV powering up. I call a tv repair guy who replaced the capacitors in the power unit and resolved the problem. However before h… read more
Expert-Repair
Expert-Repair
Owner Kingsland Auto & Marine Services
Vocational, Technical or Trade Scho
11 satisfied customers
A fuzzy logic controller for the speed control of the Nomad
A fuzzy logic controller for the speed control of the Nomad XR4000 mobile robot is designed to reach an end point, but avoid obstackles on the way. It was implemented with two inputs: data from the so… read more
romr2009
romr2009
Bachelor's Degree
235 satisfied customers
Have a 2 YO outta warentee Sony TV KDL46V25L1 s/n(NNN) NNN-NNNN
Have a 2 YO outta warentee Sony TV KDL46V25L1 s/n(NNN) NNN-NNNN Took a lightening hit and I now have the standby lite blinking 3 times.. Replaced the G2A power supply board.. same symptoms. Measured t… read more
Neil
Neil
Associate Degree
2,630 satisfied customers
M Nikon L% lens wont oen. Message says, Lens Error. I ha
M Nikon L% lens won't oen. Message says, Lens Error. I ha e tried twosets of new batteries.… read more
PramitP
PramitP
Self-Employed
Diploma
9 satisfied customers
I have a Toshiba Regza 32HL67U, for some reason I have no picture
I have a Toshiba Regza 32HL67U, for some reason I have no picture but I do have sound. I got a new cable box and just ran through all of the troubleshooting with the cable company. Manufacture date is… read more
euro-pro llc
euro-pro llc
TV Tech III
Associate Degree
1,575 satisfied customers
I have an Olevia 540-b11 TV and I have sound but no picture.
I have an Olevia 540-b11 TV and I have sound but no picture. Backlights are working screen has a nice glow. I have replace the main board and the LCD control board but have the same response. I cant s… read more
Rahul P.
Rahul P.
Bachelor's Degree
576 satisfied customers
I have a Samsung Home Theater System (HT-Q70). The LCD screen
I have a Samsung Home Theater System (HT-Q70). The LCD screen does not light up so we cant read anything. Everything else is working ok. Please advise.… read more
Rahul P.
Rahul P.
Bachelor's Degree
576 satisfied customers
I have a Panasonic Plasma TV that was disabled last Friday
I have a Panasonic Plasma TV that was disabled last Friday by a near miss by lightning in a thunderstorm. We have DirecTV, and it is working with other TVs, but not the Plasma, which was built in Octo… read more
Rahul P.
Rahul P.
Bachelor's Degree
576 satisfied customers
help i have a nikon coolpix 4300 ive tried 2 compactflash cards
help i have a nikon coolpix 4300 ive tried 2 compactflash cards and my camera says OUT OF MEMORY after formatting whats wrong??… read more
Jim
Jim
Bachelor's Degree
6 satisfied customers
I am working with a retired chemist, he has a Hitachi Electron
I am working with a retired chemist, he has a Hitachi Electron Microscope and need to hookup an oxford power Source to the System. I have some of it figured out put I don't have a cabling interface, i… read more
sany
sany
Bachelor's Degree
84 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x