How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Greg A. Your Own Question
Greg A.
Greg A., Engineer
Category: Consumer Electronics
Satisfied Customers: 9333
Experience:  Engineer / Consultant
Type Your Consumer Electronics Question Here...
Greg A. is online now
A new question is answered every 9 seconds

I put a telephone number by mistake and don't know how to

Customer Question

I put a telephone number by mistake and don't know how to remove call block.
JA: How old is the phone?
Customer: Model 270 I think.
JA: How long has this been going on? What troubleshooting have you tried?
Customer: My manual does not explain how to remove a call block.
JA: Anything else you want the Electronics Expert to know before I connect you?
Customer: No
Submitted: 6 months ago.
Category: Consumer Electronics
Expert:  Greg A. replied 6 months ago.

Hello & Welcome to Just Answer,

I'm Greg and will do my best to assist with this issue today.

Sorry I didn't see your question earlier and to hear of any issue you are having with your phones.

To help you with this issue, may I ask:

1) The FULL Make & Model Number of the phone system you are working with? If this is a cordless system, that model should be printed on a sticker on the bottom or back of the MAIN base station.

Please REPLY using the box below and the SEND button.
*** IMPORTANT NOTE: *** ANY requests for "additional services" (such as a phone call) are OPTIONAL and sent BY THE SITE AUTOMATICALLY (and not me), and I may NOT be available by phone.
Feel free to DECLINE (close) any such offers, and continue in this text/chat form.


Expert:  Greg A. replied 5 months ago.

Hi again,

I see it has been a while and I haven't seen a response on this page, so I just wanted to follow up to see if you have any more questions concerning this issue OR if the issue was resolved?

I look forward to any further questions or results that you may have.

Thanks, ***** *****
--. .-