How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie
Louie, Technician
Category: Consumer Electronics
Satisfied Customers: 12675
Experience:  25+ yrs. experience in the field and 5+ yrs. online, down to component level.
13948492
Type Your Consumer Electronics Question Here...
Louie is online now
A new question is answered every 9 seconds

I need information about replacing the LF/MF crossover in a

Customer Question

I need information about replacing the LF/MF crossover in a B&W 802D speaker.
JA: What's the make/model of your device? How old is it?
Customer: I just gave it to you? 6 years old?
JA: How long has this been going on? What troubleshooting have you tried?
Customer: The crossover is blown - I've checked for continuity of the 2 main capacitors and the one resistor.
JA: Anything else you want the Electronics Expert to know before I connect you?
Customer: I thin thats it...
Submitted: 1 month ago.
Category: Consumer Electronics
Expert:  Louie replied 1 month ago.

Hi and welcome to JustAnswer, I’m Louie. Sorry you had to wait awhile but I’ll do my best to help.

This is an independent site and members of this online community provide information, repair tips, technical assistance as a form of paid Q & A service.

Expert:  Louie replied 1 month ago.

Initially, please post back with clear pictures of the "...LF/MF crossover in a B&W 802D..." Click HERE.
These pictures would then serve as common references.

Still, let's try check and review the basics. Proposed preliminary tries (if have not been done):

  • • only the resistor should show a resistance reading;
  • • the capacitors would/should not show any resistance readings.