How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Engineer and electronic enthusiast for more than 12 years.
Category: Consumer Electronics
Satisfied Customers: 227
Experience:  I am here to help you!
23822421
Type Your Consumer Electronics Question Here...
John is online now
A new question is answered every 9 seconds

I am trying to print from my corel draw and the outlines are

Customer Question

I am trying to print from my corel draw and the outlines are not printing on my banner material, the fill is printing but no outline. What could I do
JA: What's the make/model of your device? How old is it?
Customer: 5 6 years old
JA: How long has this been going on? What troubleshooting have you tried?
Customer: model: VP540I
JA: Anything else you want the instrument expert to know before I connect you?
Customer: no
Submitted: 5 months ago.
Category: Consumer Electronics
Expert:  Russell H. replied 5 months ago.

Hi, thank you for contacting JustAnswer.com. My name is***** will do my best to provide the right answer to your question.
Try disabling 'Borderless printing' in either the printer's driver settings, or in the CorelDraw print settings, or both preferably.

That may settle it - if not,or if you need further instructions, let me know.