Electronics Repair Questions? Ask an Electronics Technician
Hi, I'm Nathan.Sorry to hear that you're having trouble, but I'll do my best to help you. Please give me a few moments to review your details here.
This type of problem is often caused by a contaminated laser lens. You can attempt to clean it by blowing out the disc tray/slot area with a can of compressed air for dusting computers (keep the can upright only so you don't get chemical propellant on the lens).
If this doesn't help, you can try a specialty cleaning disc (Example cleaner disc) which has little brushes that clean the lens more thoroughly.
If neither of these cleaning steps help, then this is more likely a hardware fault, which could include a bad laser emitter or pickup, faulty spindle motor or laser transport, bad d/a converter, etc. Any of these issues would require repair/replacement.
Let me know the results, and I'll advise further, if needed.
Hello, it appears your question is still open.
Do you need more help with this?If so, just reply back on this page. If I’ve answered your question, please let me know you are satisfied, to conclude our session – this is the only way I am credited for my work.
Please note: You have already paid your fee to the site; I'd like to help you and provide value for that fee, but I do need to communicate with you here to do so, if more help is needed.