How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John, Engineer and electronic enthusiast for more than 12 years.
Category: Consumer Electronics
Satisfied Customers: 227
Experience:  I am here to help you!
Type Your Consumer Electronics Question Here...
John is online now
A new question is answered every 9 seconds

The Kenwood TS-430S schematic diagram shows and internal 20

Customer Question

The Kenwood TS-430S schematic diagram shows and internal 20 A fuse. Where is it actually physically located?
JA: What's the make/model of your device? How old is it?
Customer: Kenwood TS-430S HF transceiver 1983 - 1989
JA: How long has this been going on? What troubleshooting have you tried?
Customer: I get no indication of power - no lights - no display - no audio - external PS delivering proper voltage
JA: Anything else you want the electronics expert to know before I connect you?
Customer: I suspect the internal fuse - I see it on the schematic, but cannot find it in the radio -
Submitted: 8 months ago.
Category: Consumer Electronics
Expert:  Louie replied 8 months ago.

Hi and welcome to the site, I’m Louie. Sorry you had to wait awhile but I’ll do my best to help.

Initially, bear with us; re-confirm and post back where in the schematics is the "... internal 20 A fuse..." or more particularly, the board designation; something like an F101.