How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John, Engineer and electronic enthusiast for more than 12 years.
Category: Consumer Electronics
Satisfied Customers: 227
Experience:  I am here to help you!
Type Your Consumer Electronics Question Here...
John is online now
A new question is answered every 9 seconds

I have a sleepstyle 600 with an error 1 reading. The blower

Customer Question

I have a sleepstyle 600 with an error 1 reading. The blower fan will not start. It try to start, but after three times it goes to the error code message 1 and starts to blink. I opened the machine and got to the blower. It had rust around the spindle. I cleaned it and one time it started but when I put it back together it went through the three cycles and came up with the error code 1 again.Could it be that the spindle needs lubricating so that it will shift into high speed?
Submitted: 12 months ago.
Category: Consumer Electronics
Expert:  Jason Jones replied 12 months ago.

I am the person that will be helping you today.

May I ask how old the device is?

I will be standing by, looking forward to your response.

Thank you,