How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Nathan Your Own Question
Nathan, Engineer
Category: Consumer Electronics
Satisfied Customers: 25485
Experience:  Managing Director at Pollinate Group LLC
Type Your Consumer Electronics Question Here...
Nathan is online now
A new question is answered every 9 seconds

I just got a HDMI to DVI-D cable - to connect a computer to

Customer Question

Hi. I just got a HDMI to DVI-D cable - to connect a computer to a Yamaha LPX 500 proyector. I am trying to project a PPP. It doesn't want to work - any suggestions
Submitted: 1 year ago.
Category: Consumer Electronics
Expert:  Nathan replied 1 year ago.

Hi, I'm Nathan.

Sorry to hear that you're having trouble with this but I'll do my best to help you.

Can you recheck that insignia model for me?

Customer: replied 1 year ago.
the insignia cable is NS-PI06502
Customer: replied 1 year ago.
hello ?
Expert:  Nathan replied 1 year ago.

Thank you for clarifying.

That is a fairly basic model projector, so the pri***** *****mitation here is its resolution; you'll need to go into the laptop display settings menu, enable the 2nd monitor output, and then set the output resolution to 1024x768.

Let me know if that helps.