How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Electronic Engineer
Category: Consumer Electronics
Satisfied Customers: 17261
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your Consumer Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a sharp notevision projector, i took it apart to

Customer Question

i have a sharp notevision projector, i took it apart to change the dlp chip, now the projector doesnt turn on, originally showed a top3 lights lit on when i put it together, now nothing. any help would be great
Submitted: 1 year ago.
Category: Consumer Electronics
Expert:  Pete replied 1 year ago.

Hi Bruce,

The power supplies in these projectors give trouble, do you have a voltmeter available to test it?

Customer: replied 1 year ago.
we do, can u help us?
Expert:  Pete replied 1 year ago.

Yes, first can you test the power supply board to see if any mains ac voltage is going into it?

If there is, then check if any voltage is getting to the lamp?

Customer: replied 1 year ago.
can you talk us through it via the telephone?
Expert:  Pete replied 1 year ago.

I am not at my desk right now; I will see if another tech can assist you with this.