How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jack Your Own Question
Jack, Technician
Category: Consumer Electronics
Satisfied Customers: 9782
Experience:  35 years experience as audio/video repair and installation tech.
Type Your Consumer Electronics Question Here...
Jack is online now
A new question is answered every 9 seconds

I have a sony receiverd d n1040.The display is very low

Customer Question

hi,i have a sony receiverd
d n1040.The display is very low saying 60 percent.How do i change the settings to were i can see the display better.
Submitted: 1 year ago.
Category: Consumer Electronics
Expert:  Jack replied 1 year ago.

Hi , I`m Jack

Perhaps i can help you with this .

The display is adjustable in 3 increments , look on the front panel between bluetooth and display you will see DIMMER press it a few times to change the brightness

Customer: replied 1 year ago.
tryed that.Doesnt seem to do anything.
Expert:  Jack replied 1 year ago.

You mean the button has no effect whatsoever ??

How did you get to see the 60% level ?

Customer: replied 1 year ago.
I can barely see the display.Its saying 60 percent.Iam woundering how I can change that to go up to maybe 100?percent.On The receiver no matter changing the volume or setting it's very hard to read the diplay
Expert:  Jack replied 1 year ago.

The display is saying 60% all the time or when you press the dimmer button ?

Expert:  Jack replied 1 year ago.

press it repeatedly , not only once

Customer: replied 1 year ago.
when I push repetdly it barley shows the 60.when u turn the system on and off or turn the voulume up and down I can't read the display at all.Woundering if there's another way to reset the receiver to adjust the dimmer to bevisable
Expert:  Jack replied 1 year ago.

I`m sorry but something came up and i will have to opt out now.

You don`t have to do anything , your question will be reposted for other techs. to see and jump in.
Please just standby and someone should be with you shortly .
PS. DO NOT rate or it will hinder the repost .