How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Martin Your Own Question
Martin, Engineer
Category: Consumer Electronics
Satisfied Customers: 4944
Experience:  16 years, include works in aluminium plant, industrial machinery, military weapons, programming
Type Your Consumer Electronics Question Here...
Martin is online now
A new question is answered every 9 seconds

Re Kodak 860H carousel projector. Motor is overheating and

Customer Question

re Kodak 860H carousel projector. Motor is overheating and siezing up. Thought fan bearings were bad but took motor out and it ran for eight minutes then began to sieze. Temp was 200degrees.
Submitted: 1 year ago.
Category: Consumer Electronics
Expert:  Martin replied 1 year ago.

Hi. I would suspect a lack of lubrification or connections that drop with thermal expention. I don't have one with me to easilly look at what can cause this but check the service manual and follow the troubleshooting and lubrification section and let me know if it still have the problem: