How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: Consumer Electronics
Satisfied Customers: 17919
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Consumer Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

We have a Panasonic 7500 POS and we need to clear the buffer.

Customer Question

We have a Panasonic 7500 POS and we need to clear the buffer. We lost our toggle switch (stopped working) and now we can't clear any of the "pending orders" and registers are running very slow. We are getting a new system but still need this to work until they are installed.
Submitted: 1 year ago.
Category: Consumer Electronics
Expert:  Pete replied 1 year ago.
Hello
Customer: replied 1 year ago.
I do not see any response to my question
Expert:  Pete replied 1 year ago.
Thanks for replying back to me. You were offline when I responded yesterday.The buffer reset method on this POS is the same as the 5500 - see pages 3-29 to 3-33:http://www.lvsip.com/manuals/Panisonic/OFFICIAL%20MANUAL/pg5500lq.pdf