How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Cerecita Your Own Question
Category: Consumer Electronics
Satisfied Customers: 21422
Type Your Consumer Electronics Question Here...
Cerecita is online now
A new question is answered every 9 seconds

I have Sentry V260 safe that uses key & code/battery! I cant

Customer Question

I have Sentry V260 safe that uses key & code/battery! I cant get it open> What code should I use ? Serial M351007
JA: The expert will know what to do. Please tell me everything you can so the expert can help you best.
JA: Is there anything else important you think the expert should know?
Customer: Is anybody there?
JA: I'm sending you to a secure page on JustAnswer so you can place the $5 fully refundable deposit now. While you're filling out that form, I'll tell the expert about your situation and connect you two.
Submitted: 1 year ago.
Category: Consumer Electronics
Expert:  Cerecita replied 1 year ago.

Hello, and welcome.

I can give you instructions to replace the batteries, if you don't have them or have never done this before, but, as far as the combination is concerned, if your father forgot it, the only way to retrieve it is from the manufacturer, Sentry. Codes are not available online, as that would compromise the security of your safe. However, this particular model comes with two sets of keys: the four-bitted key to use in conjunction with the combination AND an 'overrirde' or skeleton key to use to open, in just your situation. To access the override key, follow these directions:

Key override

If your electronic lock fails or you do not have any codes

available, you may use a key override to access this unit.


Remove the battery cover, disconnect and remove the

battery holder. (there should be a plastic panel under your keypad; look for a small hole towards the left or middle and take a penpoint or the end of a paperclip, push it into the hole, and slide the panel off to the right; inside, you will see the battery holder.)


Insert the skeleton key (second set of keys provided)

into the key hole inside the opening for the battery. (behind the battery holder)


Turn the key to the right.


Turn the four-bitted key to the right.


Open the door


If this doesn't work for you, please visit this webpage and follow all directions, to retrieve the code and you will access the battery holder and replace the batteries, as indicated above (use 4 AA alkaline or lithium for electronics batteries, but never non-alkaline or rechargeable):

You will need to prove safe ownership with a Notary Form, which is a link you can click on at the site, above. If necessary, you an also request expedited service for an additional fee, and have the combination in 48 hours (business days, only).

I hope you can use the override key and get the safe open; however, you will still need the correct code, or you can continue using the override key to open the safe, if you wish.

Please be so kind as to rate my answer with positive feedback; that is the only way I receive credit for my assistance. Thank you very much!

Providing a positive rating will not end our conversation, should you need me for any follow-up. Simply click 'Reply' for clarification or additional information, if needed, and I will be glad to continue.

Warmest regards,