How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Richard Your Own Question
Richard, Customer Service
Category: Consumer Electronics
Satisfied Customers: 36777
Experience:  Over 20 years fixing Electronically devices
Type Your Consumer Electronics Question Here...
Richard is online now
A new question is answered every 9 seconds

No link.ReconnectbaseACadaptor.

Customer Question

No link.ReconnectbaseACadaptor.
Submitted: 1 year ago.
Category: Consumer Electronics
Expert:  Richard replied 1 year ago.

Hi there and welcome

First, if you connect the AC adapter for the base station to a different power socket on the wall, does the phone then remove the error?

Customer: replied 1 year ago.
Expert:  Richard replied 1 year ago.

ok, can you do the following please

  1. On the handset press [MENU]
  2. Press the [▲] or the [▼] button to select "Initial setting" then press [OK].
  3. Press the [▲] or the [▼] button to select "Registration" then press [OK].
  4. Press the [▲] or the [▼] button to select "HS Registration" then press [OK].
  5. On the Base unit: Press and hold [LOCATOR] for approximately 5 seconds. (No registration tone) Note: If all registered handsets start ringing, press the same button to stop. Then repeat this step.
  6. The next step must be completed within 90 seconds. On the Handset: Press [OK], then wait until a long beep sounds.

Tell me if it then functions please