How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John, Engineer and electronic enthusiast for more than 12 years.
Category: Consumer Electronics
Satisfied Customers: 227
Experience:  I am here to help you!
Type Your Consumer Electronics Question Here...
John is online now
A new question is answered every 9 seconds

I have a Denon DP 300F. it as stored 18mths, now went to

Customer Question

I have a Denon DP 300F. it as stored for about 18mths, now went to connect to new system and it will not spin, seems start and stop do not iwsh to click- motor for belt is going around. Please help live in the hills!
Submitted: 1 year ago.
Category: Consumer Electronics
Expert:  Louie replied 1 year ago.

Hi and welcome to JustAnswer,

Thank you for the question and your patience. Should you still need assistance for information purposes only...

Initially, have you tried manually exercising/spinning the turntable/platter a number of times? the event of a stuck center shaft or even dried lubricant

Or check the belt if still snug fit to the bottom of the turntable?