How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: Consumer Electronics
Satisfied Customers: 17265
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Consumer Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a optima TX 1080 DLP. I just recently replaced the

Customer Question

I have a optima TX 1080 DLP. I just recently replaced the bulb and when I tried to turn it on it would power up and there would be a brief flash of light then it would turn itself off. Any ideas?
Submitted: 1 year ago.
Category: Consumer Electronics
Expert:  Pete replied 1 year ago.

Hello,

Remove the lamp and firmly insert it again, to make sure there is not a loose connection.

Also ensure the lamp door is securely and tightly fitted.

Let me know if it then stays lit when you turn it on?

Pete.