How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Freddy M. Your Own Question
Freddy M.
Freddy M., Customer Service
Category: Consumer Electronics
Satisfied Customers: 18398
Experience:  Years of experience in IT and customer support
Type Your Consumer Electronics Question Here...
Freddy M. is online now
A new question is answered every 9 seconds

How do I add Honeywell voyager 9520 bar code scanner to

Customer Question

how do I add Honeywell voyager 9520 bar code scanner
to sam4s er5200
Submitted: 1 year ago.
Category: Consumer Electronics
Expert:  Pete replied 1 year ago.

Hi there,

Connect the scanner, then program the PLU for each barcoded item as follows:

1. Using the key marked P - turn to the PGM position

2. Enter 3 0 0, and press SUB TOTAL key

3. Select the PLU you wish to program by scanning the Product

4. Overlay the Alpha keyboard and type your description and press the X/TIME key

5. Repeat steps 3 & 4 above for all your PLU descriptions 6. Press CASH when finished to save.

Customer: replied 1 year ago.
Tryed this but the issue is when I start to type with the alpha keyboard the first button click does not come up as a letter it comes up as the description for the button. Then when I hit the second letter of the item it starts to type
Expert:  Pete replied 1 year ago.

Are you certain the key is in the PGM position?

Expert:  Pete replied 1 year ago.

I am unable to call at the moment, but I will check if another expert is available to call you.

Expert:  Freddy M. replied 1 year ago.

Hello my name is***** do not rate until we are finished. I look forward to assisting and am very sorry to hear that you are having this problem. You said the second item will type. Press the first letter you are typing twice, and it should start typing. Let me know the results either way.