How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie
Louie, Technician
Category: Consumer Electronics
Satisfied Customers: 12596
Experience:  25+ yrs. experience in the field and 5+ yrs. online, down to component level.
13948492
Type Your Consumer Electronics Question Here...
Louie is online now
A new question is answered every 9 seconds

I'm Lance Harper [email protected] California Public Radio Working on a JBL PWB 140295

Customer Question

Hi, I'm Lance Harper [email protected] California Public Radio
Working on a JBL PWB 140295-6 Amp board for a JBL 515 powered speaker.
Thermistor, (RT601) checks fine, but gets hot and stays hot, FETs not shorted, D601 bridge rectifier fine. Still will not turn on.
Any way I could get a copy of the Troubleshooting and schematic guide?
Submitted: 2 years ago.
Category: Consumer Electronics
Expert:  Louie replied 2 years ago.
Hi and welcome to JustAnswer,
Thank you for the question and your patience. Should you still need assistance for information purposes only...
Initially, RT601 is getting hot as relay K601 is not kicking on. It would appear to be a power supply issue if none of the outputs has failed.
Will upload the Troubleshooting Guide and schematic diagrams upon your reply.
Customer: replied 2 years ago.
Thanks for your assistance. I was hopping it was just one of the output FET's had shorted out, cheap and ez :-) I look forward to the guide and schematic.
Expert:  Louie replied 2 years ago.
Hi again Lance,
Please see the links below:
schematics
https://dl.dropboxusercontent.com/u/92079112/E515%20PWA%20Sch.pdf
troubleshooting guide
https://dl.dropboxusercontent.com/u/92079112/Eon%20515%20Troubleshooting%20Guide.pdf
Customer: replied 2 years ago.
Thank You, ***** ***** will post what I find.
Expert:  Louie replied 2 years ago.
Right click then select “Save As…” to download the file. The links have a very limited time.
And would look forward to an update when able.