How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Viet - Tech Your Own Question
Viet - Tech
Viet - Tech, Electronics Tech
Category: Consumer Electronics
Satisfied Customers: 37842
Experience:  Troubleshoot consumer electronics devices.
Type Your Consumer Electronics Question Here...
Viet - Tech is online now
A new question is answered every 9 seconds

This is Kim, we have a TEC MA 1350 that needs to have the

Customer Question

Hi, this is Kim, we have a TEC MA 1350 that needs to have the tax rate changed, I was able to change it on the MA 1450 we have to the 1350 is enough different that I can't use the same instructions
Submitted: 2 years ago.
Category: Consumer Electronics
Expert:  Viet - Tech replied 2 years ago.
Hello! Thank you for your question. I will be assisting you today.
I'm sorry about the issue. Please try:
1. Turn the key to Z and reset all totals. (The register must be zeroed out by a Z REPORT or by using a Status Clear.)
2. Turn the key to the SET position.
3. Press in the following order: 0, TX/M, ST, (Enter Your Tax Rate Here), then AT/TL.
4. Turn the Key back to REG.
Also, if you need, the manual is at the website below:
, and/or at
When you are available, please reply back at the box below to continue. Thank you,