How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Russell H. Your Own Question
Russell H.
Russell H., Service Tech
Category: Consumer Electronics
Satisfied Customers: 10902
Experience:  8+ years of professional experience
Type Your Consumer Electronics Question Here...
Russell H. is online now
A new question is answered every 9 seconds

How do I set combo on a X055H sentry safe?

Customer Question

How do I set combo on a X055H sentry safe?
Submitted: 2 years ago.
Category: Consumer Electronics
Expert:  Russell H. replied 2 years ago.
Hi, thank you for contacting My name is Russell. I will do my best to provide the right answer to your question.
To set the combination on your Sentry Safe:
1. open the door (use the key if it is not already open.)
2. remove the battery cover, on the back of the opened door, and press the key button inside the battery compartment.
3. the yellow LED should be On at this point.
4. enter the new code. It should be two (2) to eight (8) digits.
5. press the # *****
That sets the new combination.
If this completes the question as far as you are concerned, please rate my Answer - favorably - so that I may be paid for the work and care I have spent on getting your question clearly expressed and authoritatively right.
To program your new user code: Open the door, remove the battery cover and press the key button inside the battery compartment on the door back. Yellow LED will go on. Enter your new code (2-8 digits) followed by the “#” key.