How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Electronic Engineer
Category: Consumer Electronics
Satisfied Customers: 17337
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your Consumer Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a model af-2 projector. It advances continuously. It will go

Customer Question

I have a model af-2 projector. It advances continuously. It will go forward. It will reverse. But it will not stop cycling. It will not stay still to focus or view the slide. How can I get it to stop and perform normally.
Submitted: 2 years ago.
Category: Consumer Electronics
Expert:  Pete replied 2 years ago.
I am Pete, and I'll be happy to assist with your question today.
If the projector cycles continuously, then there may be a bent or damaged lever in the linkage - check for any obvious signs of damage and repair or replace if necessary.

Related Consumer Electronics Questions