How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Electronic Engineer
Category: Consumer Electronics
Satisfied Customers: 18102
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your Consumer Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

V10 picked up single link DVI to hook up from Mac air to V10.

Customer Question

V10 picked up single link DVI to hook up from Mac air to V10. How do I get the to communicate with each other- the air to the projector?
Submitted: 2 years ago.
Category: Consumer Electronics
Expert:  Pete replied 2 years ago.
Hi there,
The projector should automatically pick up the display signal from the AIR.
have you tried using a different DVI cable?
Customer: replied 2 years ago.

I thought so too. I never had a problem with my regular projector, this mini projector was different. Yes. bought to seperate DVI cables but as I find out, the ADI cable is my missing part. Mini DVI to ADC adapter then to port. You took to long had to do my own research. Im very impatient. Thanks for trying

Expert:  Pete replied 2 years ago.
Ok, let me know if you need anything else at all.
My goal is your satisfaction, and my hope is that at the end of our conversation you are fully satisfied and leave a positive rating for me and my answer.