How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dave Your Own Question
Dave, Electronic Hardware reseller
Category: Consumer Electronics
Satisfied Customers: 65
Experience:  majored in Electronics. Now running a reseller shop. Printer Guru.
Type Your Consumer Electronics Question Here...
Dave is online now
A new question is answered every 9 seconds

How do you access a DS1000 when the default password XXXXX been

Customer Question

How do you access a DS1000 when the default password XXXXX been changed.
Submitted: 8 years ago.
Category: Consumer Electronics
Expert:  Dave replied 8 years ago.
Thank you for asking your question on JustAnswer.
The other Experts and I are working on your answer. By the way, it would help us to know:

-Could you explain your situation a little more?

Thank you again for trusting us with your problem.
Customer: replied 8 years ago.
In order to program this system, you have to enter a programmers password. The default password XXXXX XXXXX This has been changed. Most systems have a hidden override password XXXXX a back door password. If either applies, we just need to know what it is.
Expert:  Dave replied 8 years ago.
Thank youCustomerbr />For the situation update.

It would help us to know :

- Could you please confirm me if you have the following system:


- Could you please explain a bit more about the product and its usage.

appreciate your patience.
Customer: replied 8 years ago.
Yes this is the NEC UBSD DS1000. We did not install it, so we don't know what password XXXXX original programmer put in it.
Expert:  Dave replied 8 years ago.
Customerbr />
Extreme grief to inform you that the override or backdoor passwords are only available with the NEC specified service personals, as it is a classified information for the product.

It could be retrieved by contacting the personals. it could be done by mailing formally your "Lost password XXXXX" to the following email address :
[email protected]