How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rusty Your Own Question
Rusty
Rusty, Music Professional
Category: Electronic Musical Instruments
Satisfied Customers: 5888
Experience:  Sound Engineer, Electrical Issues, Tone Consulting
63817454
Type Your Electronic Musical Instruments Question Here...
Rusty is online now
A new question is answered every 9 seconds

I have a Yamaha RX-V475 receiver. When I turn up the volume

Customer Question

hello! I have a Yamaha RX-V475 receiver. When I turn up the volume it shuts off then I''l turn it back on and it states: "check SP Wirtes"
JA: What's the make/model of your device? How old is it?
Customer: Yamaha RX-V475 receiver.
JA: How long has this been going on? What troubleshooting have you tried?
Customer: just today checked all connections
JA: Anything else you want the instrument expert to know before I connect you?
Customer: no
Submitted: 9 days ago.
Category: Electronic Musical Instruments
Expert:  Rusty replied 9 days ago.

Hello, my name is***** to Justanswer! Give me just a few minutes to look up some specifics, I'm working on this now.

Customer: replied 9 days ago.
thank you
Expert:  Rusty replied 9 days ago.

That is a fault in your wiring. When you turn it up, the wattage increases on your speaker terminals. Once it gets loud enough, it sparks across terminals, causing it to shut off.

Look at your speaker connections. Make sure each one is clean, and that there isn't even a single strand of wire that gets close to another speaker terminal. That is the cause of that error.

Unless there is internal damage that will require a shop, you'll find the problem at the speaker connections. These can be random, and occur at any time, so it's important to be thorough while you're reconnecting the speakers. Do one at a time so you don't mix up which speakers plug into which terminal.

Customer: replied 9 days ago.
That sounds right!!! thank you
Expert:  Rusty replied 9 days ago.

You're very welcome! Let me know what you find. I'm here in case you have any questions.

Related Electronic Musical Instruments Questions