How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ITPeter Your Own Question
ITPeter, Electronics Engineer
Category: Electronic Musical Instruments
Satisfied Customers: 17931
Experience:  Over 16 years' experience in installing and repairing electronics.
Type Your Electronic Musical Instruments Question Here...
ITPeter is online now
A new question is answered every 9 seconds

I have a Presonus Firestudio Project. The light will only

Customer Question

I have a Presonus Firestudio Project. The light will only flash red and the unit will not sync. Any ideas?
Submitted: 1 year ago.
Category: Electronic Musical Instruments
Expert:  ITPeter replied 1 year ago.

Hi Rick,

Customer: replied 1 year ago.
Hi Pete. Any ideas as to what might be wrong with my audio interface?
Expert:  ITPeter replied 1 year ago.

After installing the latest driver, go through the installation instructions again: shut down Universal control, disconnect the FSProject's firewire cable, reboot the unit.

If going through the install procedure does not work then the unit has a fault, possibly a blown component somewhere within the unit.

Expert:  ITPeter replied 1 year ago.

Hi, just checking in on your question, do you need any further assistance?

Customer: replied 1 year ago.
I believe the unit has a fault. I would like to know how I can test the components to see if I can repair it. I did replace the unit with a new one which works perfectly fine.
Expert:  ITPeter replied 1 year ago.

Ok, what test equipment do you have available?