How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ITPeter Your Own Question
ITPeter
ITPeter, Electronics Engineer
Category: Electronic Musical Instruments
Satisfied Customers: 17650
Experience:  Over 16 years' experience in installing and repairing electronics.
30970729
Type Your Electronic Musical Instruments Question Here...
ITPeter is online now
A new question is answered every 9 seconds

Using a pss 480 as master to a psr 85 as --in single finger

Customer Question

using a pss 480 as master to a psr 85 as slave--in single finger mode , the right side works fine, but the auto accompaniament does not--all that will play are majors-no minors
Submitted: 1 year ago.
Category: Electronic Musical Instruments
Expert:  ITPeter replied 1 year ago.

Hi Gabby,

Do the auto accompaniment minor keys work if you disconnect the other keyboard?

Customer: replied 1 year ago.
Customer: replied 1 year ago.
i want the auto accompaniment of the master to be played on the slave in the single fingered mode
Customer: replied 1 year ago.
when it is mini-ed it does not
Expert:  ITPeter replied 1 year ago.

Ok, well all of the keys should work - I am not sure why they aren't working for you.

Have you tried resetting the keyboards?

Customer: replied 1 year ago.
I have reset both the master and the slave--like i said yamaha pss 480 master to yamaha 85 slave--when i play the 480(muted) the 85 will play in auto accompaniment , but no control of the keys on the 480 as to minors and sevenths--just majors
Customer: replied 1 year ago.
i'll pay the additional 18 , if you can reassure resolution
Customer: replied 1 year ago.
i tried reversing the keyboards in regards ***** ***** 85 being the master and pss 480 the slave--doesn't work either
Customer: replied 1 year ago.
has to be in the set-up , because both KB's function as they should
Expert:  ITPeter replied 1 year ago.

If it does not work after a reset, then this suggests it is not in the setup.

I will see if another expert can shed more light on this.

Pete.

Related Electronic Musical Instruments Questions