How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike Your Own Question
Mike
Mike, Master Electrician
Category: Electrical
Satisfied Customers: 1425
Experience:  Licensed Master Electrician - OnQ Certified Data Voice Audio Video Installer
11762411
Type Your Electrical Question Here...
Mike is online now
A new question is answered every 9 seconds

I have a hood vent that doesnt start wall switch but if i

Customer Question

I have a hood vent that doesnt start wall switch but if i push up on yhe contact plate it fires up so the coil hold not working were does the wall switch wires go
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: just happened a few days ago and now the other hood vent has the hae problem both running off a double wall switch
JA: Do you plan on doing the work yourself?
Customer: trying
JA: Anything else we should know to help you best?
Customer: i have 1 wire 110v runnning to wall switch
Submitted: 2 months ago.
Category: Electrical
Expert:  Sam I replied 2 months ago.

Hello, I can help. Is this a new installation or a problem that occurred with an existing set of hoods?

Expert:  Sam I replied 2 months ago.

Nevermind, it looks like from re-reading your description it is an existing set of hoods. Do you have a meter to test for voltage at the contactor coil?