How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike Your Own Question
Mike, Master Electrician
Category: Electrical
Satisfied Customers: 1425
Experience:  Licensed Master Electrician - OnQ Certified Data Voice Audio Video Installer
Type Your Electrical Question Here...
Mike is online now
A new question is answered every 9 seconds

I have a single phase 225 volt welding machine that I need

Customer Question

I have a single phase 225 volt welding machine that I need to put a 25-0 foot power cord on to get to the location outside my house so I can weld a trailer. Will it still allow me full potential of the machine?
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: Just bought the machine
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: I'm planning on using the same gage power cord I believe it is 12gage
Submitted: 8 months ago.
Category: Electrical
Expert:  Sam I replied 8 months ago.

Hello I can help. Can you clarify what length the cord will be? 25 or 250 feet?

Expert:  Sam I replied 8 months ago.

Also could you provide the electrical data found on the welder. I'm looking for rated amperage.