How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ProGrade Your Own Question
ProGrade, Certified Electrical Contractor
Category: Electrical
Satisfied Customers: 542
Experience:  28+ years exp. - installation, troubleshooting, & repair of commercial, & residential electrical systems.
Type Your Electrical Question Here...
ProGrade is online now
A new question is answered every 9 seconds

We are trying to program our INTERMATIC that we have used

Customer Question

We are trying to program our INTERMATIC that we have used for several years to program our outside lighting. The first step of the instructions says: move control lever to OFF-CLEAR for at least 5 seconds; . . . move lever to ON, RED INDICATOR will start flashing. Our RED light does not flash. We turned the lever to OFF for 15 minutes (tried several times) then turned ON but there is no red light either flashing or showing.
Submitted: 9 months ago.
Category: Electrical
Expert:  ProGrade replied 9 months ago.

Welcome to

Unfortunately, this is one indication of a defective device.. it would have to be replaced.

Let me know if you have any other questions. Thank you

Related Electrical Questions