How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike G. Your Own Question
Mike G.
Mike G., Master Electrician
Category: Electrical
Satisfied Customers: 7491
Experience:  Proven Professional 48 years Experience
Type Your Electrical Question Here...
Mike G. is online now
A new question is answered every 9 seconds

We have two fuses that just blew and now have no water

Customer Question

Hello! We have two fuses that just blew and now have no water pressure. We have a well. We flip the fuses back and they pop back in 30 seconds.
JA: I'll do all I can to help. Tell me a bit more about what's going on so we can help you best.
Customer: Hello?
JA: Hello. What do you want help with?
Customer: We have two fuses that blew and now have no water pressure.
JA: Is there anything else important you think the Electrician should know?
Customer: No.
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Electrician about your situation and then connect you two.
Submitted: 1 year ago.
Category: Electrical
Expert:  Mike G. replied 1 year ago.

Hi,I'm Mike G and I'll be assisting you. To verify where the problem is you'll need to open the connections at the well. If the circuit resets your problem is the pump motor. If it trips again the problem is the circuit to the pump.

Related Electrical Questions