How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike G. Your Own Question
Mike G.
Mike G., Master Electrician
Category: Electrical
Satisfied Customers: 7602
Experience:  Proven Professional 48 years Experience
Type Your Electrical Question Here...
Mike G. is online now
A new question is answered every 9 seconds

I have a 480 vac starter, with a 48o vac coil 7-1/2 hp

Customer Question

I have a 480 vac starter, with a 48o vac coil for a 7-1/2 hp motor. can I run control from L1 through Pressure switch, Low oil level switch and a standard on off two position switch back to one side of the coil and should it be fused?
JA: Thanks. Can you give me any more details about your issue?
Customer: Rich did you get my question?
JA: OK got it. Last thing — Electricians generally expect a deposit of about $18 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 1 year ago.
Category: Electrical
Expert:  Mike G. replied 1 year ago.

Hi, I'm Mike G and I'll be assisting you. I suggest using a double fuse holder on the control circuit.