How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike Your Own Question
Mike, Master Electrician
Category: Electrical
Satisfied Customers: 1425
Experience:  Licensed Master Electrician - OnQ Certified Data Voice Audio Video Installer
Type Your Electrical Question Here...
Mike is online now
A new question is answered every 9 seconds

Norm, I'm trying to wire a Dayton 2X440A switch to a Leeson

Customer Question

Hi Norm, I'm trying to wire a Dayton 2X440A switch to a Leeson 1 hp single phase 115v motor. I found a similar question but am still having trouble with the diagram. I have the Leeson motor all ready to go with the proper wires combined according to the diagram on the motor, but I'm not sure exactly where to put them.
Submitted: 1 year ago.
Category: Electrical
Expert:  AssuredElectrical replied 1 year ago.

Welcome. My name is ***** ***** would be glad to assist.

If you can get a picture of the motor nameplate and post here, I can put a wiring diagram together for you.

The model of the Leeson motor may be enough to acquire the information from Leeson also.

Are you operating at 230 volts?

Let me know and we can continue,