How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike G. Your Own Question
Mike G.
Mike G., Master Electrician
Category: Electrical
Satisfied Customers: 7590
Experience:  Proven Professional 48 years Experience
Type Your Electrical Question Here...
Mike G. is online now
A new question is answered every 9 seconds

I have an 8ft T12 2 lamp fixture with ballast #QTP2x97T12/UNV/1S.

This answer was rated:

I have an 8ft T12 2 lamp fixture with ballast #QTP2x97T12/UNV/1S. The tubes went out and when new tubes are installed only one of them lights up and it is not completely lit. Do you have suggestions?
Hi, I'm Mike and I'll be glad to assist you. First thing is to swap the lamps to see if that lamp lights. If not your ballast is bad, replace it.
Mike G. and other Electrical Specialists are ready to help you